HYCON HCS 16 PRO Cut Off Saw
The HYCON Diamond saw premium cuts all types of concrete, steel, brick wall, asphalt etc. The HYCON Diamond saw is a very sturdy tool intended for cutting even under the most extreme conditions. It is completely unaffected by water and dust, and all parts run in oil. The HYCON PREMIUM-saws are build for hard use day after day - without breakdowns.
16”/ø400 mm with cutting depth up to 162 mm
Can be mounted in the saw cart
Will cut any material including rebar
The cut-off saw offers top safety with the built-in ASCO System (Automatic Safety Cut off). The tool automatically cuts off if the disc jams - no injury to the operator.
-
The fact, that the saw is always working and does not require service means higher profits than with e.g. a petrol saw.
The saw stops automatically if the blade jams because of the system pressure relief valve. The blade stops rotating maximum 10 sec. after releasing the trigger.
Assuring no injury to the operator. The hydraulic Diamond saw from HYCON can be used for horizontal and vertical cutting.
Hydraulic direct drive high quality motor assume a minimum of service. Flushing water runs through body and hydraulic motor for extra cooling and to keep all surfaces cold.
-
Item no. HCS16, 20-40 l.p.m. - 3030401
Disc size - 16", ø400 mm
Oil flow, l.p.m. - 20-40
Working pressure, bar - 120
Max. pressure, bar - 172
Weight w/o hose/disc, kg - 7,8
Cutting depth, mm - 162
Noise level LPA dB - 97
Noise level LWA dB - 108
Vibration level, m/s - <2.5